Questions? Call +1 (561) 320-9995

Insulon Vacuum Jacketed Hose, Low Pressure (LP)

Vacuum Jacketed Transfer Hoses for Cryogenic and High Temperatures

Engineered with Insulon advanced vacuum insulation for ultra-high thermal performance. Insulon Hose LP is available in select sizes and pressure ratings. Suitable for cryogenic and high-temperature applications from -270°C to 815°C (-454°F to 1500°F).

Flexible stainless steel vacuum jacketed hose

Applications

Insulon Hose LP is designed to prevent over-engineering in low pressure fluid transfer applications. Download the data sheet for more details.

For high pressure applications, please see Insulon Vacuum Jacketed Hose, High Pressure (HP).

Silicon wafer semiconductor chip

Semiconductor fabrication

Improve thermal efficiency for chillers, cryo-chillers, deposition lines, and temperature control units (TCUs)

Pressure release valve on an industrial steam distribution system

High Temp Liquids & Gases

Insulon Hose LP features vacuum insulation that can be used at high temperatures

Process cooling and chillers

Cryogenic Fluid Transfer

Insulon Hose LP is designed for the transfer of liquid nitrogen, helium, argon, oxygen, and other cryogenic fluids

Hydrogen refueling station

Liquid and Cryo-Compressed H2

Manufactured with fully-annealed stainless steel, Insulon hose provides insulation while combatting hydrogen embrittlement

Cable and wire harnesses in high temperature environments need thermal insulation

Cable & Wire Harnesses

Cable and wire harnesses in high temperature environments need thermal insulation

Thermal Insulation Performance

Insulon Hose LP is designed for cryogenic and high temperature environments from -270 to 815°C (-454 to 1500°F). The charts below illustrate the thermal performance of a 1/2″ ID, 6-foot long Insulon Hose LP. The first chart highlights cryogenic insulation performance; the second chart highlights high-temperature insulation performance.

Cryogenic Insulation Performance

Chart - Insulon Vacuum Jacketed Hose LP - Cryogenic Insulation Performance
This chart illustrates the difference between the media temperature (LN2, -196°C) and the outer surface temperature (aka “touch temperature”). At steady state, the outer surface temperature of the Insulon Hose LP was over 205°C (369°F) warmer than the process media.

High-Temperature Insulation Performance

Chart - Insulon Vacuum Jacketed Hose LP - High Temperature Insulation Performance
This chart illustrates the difference between the media temperature (hot air) and the outer surface temperature (aka “touch temperature”). When the process media was 900°C (1652°F), the temperature difference was over 640°C (1150°F) at steady state.

Features & Benefits

The right thermal insulation can optimize thermal energy efficiency

Thermal Insulation

Thermal energy is valuable. Insulon Hose LP is designed with advanced vacuum insulation to help you conserve this valuable resource. Save energy, reduce heat waste, and improve overall efficiency. Download the data sheet to view cryogenic and high-temperature insulation performance data.

Condensation can lead to dripping and mold

Reduce Condensation

Proper thermal insulation helps reduce condensation on the outer surface of the hose. By limiting the accumulation of moisture, Insulon Hose LP helps prevent dripping, frost, corrosion, and the risk of mold growth.

Flexible vacuum insulated hoses with low springback characteristics

Flexibility with Low Springback

Insulon Hose LP provides flexibility with low springback for reduced stress on connections, fittings, and joints. Download the data sheet for technical specifications including static bend radius.

Flame retardant thermal insulation materials improve safety

Flame Retardant Materials

Insulon Hose LP is built with 316L stainless steel, a naturally flame-retardant material. Insulon Hose LP is engineered for thermal environments from -270°C to 815°C (-454°F to 1500°F). If you need vacuum jacketed tubing for higher temperature applications, please fill out our custom tubing request form.

Fibrous thermal insulation materials are messy, high-maintenance, and difficult to install

Non-Fibrous Insulation

Fibrous insulation materials can be cumbersome to install, inspect, and maintain. They can become compressed over time, reducing their effectiveness as an insulator. They can also release fibers, causing problems with contamination and inhalation. Insulon Hose LP provides a non-fibrous insulation solution for cleanrooms and other sanitary environments.

FAQ — Vacuum Jacketed Hoses

  • Are end fittings already attached?

    Depending on the type of end fitting selected, the fitting will either be installed on the hose before shipment or will be delivered in-box.

    End fittings that are installed before shipment:

    • CGA-295 Brass
    • JIC swivel nuts
    • Other flared end fittings
    • Flanges

    End fittings that are shipped in-box:

    • Compression unions
    • Compression adapters (NPT, BSPT, etc.)

    End fittings are an optional add-on. Insulon Hose may be ordered without end fittings, in which case they will be delivered with fully-weldable 316 stainless steel tube stubs.

  • Are bulk discounts available?

    Yes, bulk discounts are available for qualifying orders. Request a quote →

  • Can vacuum jacketed hoses be ordered in longer sections and cut to length?

    No, vacuum jacketed hoses cannot be cut to length after delivery. They must be ordered in the correct size. Insulon vacuum jacketed hose are available in lengths up to 20 meters (66 feet).

  • What does LP stand for?
    LP stands for low pressure. Insulon Hose LP is engineered for low pressure fluid transfer applications. Select product diameter to view pressure rating. For high temperature applications, a pressure derating factor is applied. Contact us for assistance. Insulon Hose LP is available in two performance levels:
    1. Standard
    2. Multi-Layer Insulation (MLI)
  • What does HP stand for?
    HP stands for low pressure. Insulon Hose HP is engineered for low pressure fluid transfer applications. Select product diameter to view pressure rating. For high temperature applications, a pressure derating factor is applied. Contact us for assistance. Insulon Hose HP is available in two performance levels:
    1. Standard
    2. Multi-Layer Insulation (MLI)

Custom Vacuum Insulated Tubing:

Does Insulon Hose LP not meet your requirements? We also engineer Insulon Technology into custom vacuum jacketed hoses, piping, and bend-to-shape tubing. Custom projects are evaluated on a case-by-case basis.

Flexible vacuum jacketed tube

Flexible Tubes & Hoses

High-performance insulation, small bend radius, and easy installation. Flexible vacuum insulated tubes withstand vibration and other mechanical stresses.

Flexible tubes and hoses →

Bendable vacuum insulated tube that holds its shape

Bend-to-Shape Tubing

Field-bendable tubing that holds its shape. Adjust to your desired form, and our bend-to-shape tubes stay in position while delivering high-performance insulation.

Bend-to-shape tubing →

Small diameter vacuum insulated tubes are displayed next to a U.S. dime to demonstrate small size

Small-Bore & Miniature Tubing

Small-diameter and miniature vacuum jacketed tubes for compact and space-constrained systems. Ultra-thin design and ultra-high performance.

Small-bore & miniature tubing →

Stainless steel vacuum insulated pipes

Straight, Rigid Piping

Rugged, durable vacuum insulated tubes and pipes for cryogenic and high temperatures. Option to include multi-layer insulation to reduce radiation heat transfer.